Lounge Chair
Side Tray Hack
A lounge chair offers an ideal spot to rest after a long day. Or an ideal spot to rest for the entire day. Sturdy and comfortable, it’s likely to become the ultimate relaxation destination for years to come.
This chair fits a 26" cushion and features an adjustable backrest with multiple angles as well as storage when not in use.
Start building the frame and integrated storage, then clad the seat portion, and complete it with the backrest and support. After a light sanding and coat of protectant, this project is ready for some serious relaxation.
Note: Lounge cushion not included.
Before you get started, please read our info on safety, fasteners and building tips.
Before building, please consult our Terms of Use.
Lounge Chair
Materials
- (2) 2 x 4 x 10' 下载澳门永利app官网® brand pressure treated pine
- (3) 2 x 2 x 10' 下载澳门永利app官网® brand pressure treated pine
- (16) 1 x 4 x 10' 下载澳门永利app官网® brand pressure treated pine
- 1/2 lb. box of 1 1/4" wood screws + appropriate bit
- 1/2 lb. box of 1 5/8" wood screws + appropriate bit
- 1/2 lb. box of 2" wood screws + appropriate bit
- 1/2 lb. box of 2 1/2" wood screws + appropriate bit
- (1) 30" x 1 1/2" continuous hinge
- (2) 1/4" x 4" galvanized carriage bolts and nuts
- (4) 1/4" galvanized washers
- Preferred wood finish
Tools
- Pencil
- Measuring tape
- Miter saw (or chop saw)
- Table saw
- Drill/driver
- Jig saw
- Carpenter square
- Combination countersink bit (with 3" long 1/8" bit)
- 1/4" drill bit
- Clamps (two at least 5' long)
- Adjustable wrench
- Radial sander (or sanding block)
- Waterproof wood glue (optional)
- Damp cloth (optional)
Cut List
- A: (6) 1 x 4 x 75 1/4"
- C: (6) 1 x 4 x 31 1/2"
- E: (4) 1 x 4 x 27 1/4"
- F: (3) 1 x 4 x 72 1/2"
- H*: (20) 1 x 4 x 30"
- B: (12) 2 x 4 x 12 1/4"
- L*: (2) 2 x 4 x 16"
- D: (2) 2 x 2 x 72 1/2"
- G: (2) 2 x 2 x 46"
- I: (2) 2 x 2 x 23 ½"
- J: (1) 2 x 2 x 29"
- K*: (2) 2 x 2 x 14"
* Requires detail cuts.
Hack Materials
- (3) 1 x 4 x 10' 下载澳门永利app官网® brand pressure treated pine
- (1) 2 x 2 x 8' 下载澳门永利app官网® brand pressure treated pine
- ½ lb. box of 1 ¼" wood screws + appropriate bit
- ½ lb. box of 3" wood screws + appropriate bit
- Preferred wood finish
Hack Tools
- Pencil
- Measuring tape
- Miter saw (or chop saw)
- Table saw
- Drill/driver
- Jig saw
- Clamps
- Combination countersink bit
- Carpenter square
- Radial sander (or sanding block)
